Santosa 07 is the built-in solution that transforms any environment into a private relaxation area, where one is free to let himself go and regenerate his senses. Every detail was studied to make the experience even more fascinating and rewarding: the heater to ensure the appropriate temperature of use, the internal lights and the audio system complete the pleasure of the immersion while creating the right atmosphere. The technical compartment, entirely waterproof to avoid any leaks or flooding, is directly inserted inside the tub's perimeter to make sure no other plumbing or electrical systems are needed.

Fully built-in self-supporting structure in stainless steel AISI 316L, fully TIG welded, reinforced with a tubular frame that can be disassembled into two sections: the technical part and the tub part only, so that it can fit into the smallest spaces

Microperforated plates, directly on the tub's frame to make the internal shapes look linear and clean; one at the bottom for suction and three to release the filtered water evenly over the entire surface of the tub

Access to the technical area through a technical inspection hatch on the outer part

4 microperforated areas for the AIR-MASSAGE system, directly on the tub's frame to make the internal shapes look linear and clean, each with 49 micro-holes and located in the lower back and calf area

8 adjustable whirlpool jets (4 per seat) placed in the back area

Skimmer system

Water recirculation pump with prefilter from 0.52 kW/0.71 hp and a capacity of 12.7 square meters/hr

Sand filter equipped with a selector valve for cleaning from 400 mm and a capacity of 6 square meters/hr

Air pump to blow air on the microperforated areas from 0.40 kW/0.52 hp and a maximum capacity of 38 l/s

Double speed whirlpool pump for the 8 jets from 1.8 kW/0.38 kW – 2.4 hp/0.51 hp – 46.2 square meters/hr./18 square meters/hr

Elevated brightness RGB LED 7-Color and 4 W lights in stainless steel

3 kW electric heater

Electronic control unit to manage all the accessories

Touchscreen control panel on the edge of the tub

Thermal insulation for the frame

Radius of the inner corners 40° to facilitate the cleaning of the spa

Technical compartment completely sealed and directly connected to the drain in order to prevent leaks and flooding

Type: Recessed
Seats: 2-3
Size: 231 x 234 x 86 cm
Use: Indoor / outdoor
Self-supporting structure

Internal finish: Brushed stainless steel
Finish side: Brushed stainless steel/
Extra tempered glass
External panel finish: Brushed stainless steel
Frame structure: Brushed stainless steel
Tub insulation: Polyurethane foam

Tub capacity: 1300 l
Weight when empty: 560 kg
Weight when full: 1810 kg

4 AIR-MASSAGE areas with 196 micro-holes
8 whirlpool jets
2 Headrests
2 internal stainless steel LED RGB 7-color lights ø 83mm
4 W 230 V/50 Hz
Multifunctional tub management control system
Frost protection system

1 0.70 kW/0.52 hp blower pump with a maximum capacity of 38 l/s
1 double speed 1.8 kW/0.38 kW – 2.4 hp/0.51 hp – 46.2 m3/hr./18 m3/hr whirlpool pump
1 0.52 kW/0.71 hp recirculation pump with a capacity of 12-7 m3/hr
1 3 kW electric heater

Type: skimmer
Filter: Glass crystals with a manual selector valve

Type: automatic PH / bromine pad

Supply: single phase 220-240 50 Hz
Three phase (on request)
Maximum absorption 5.8 kW

Control system on the upper edge: with touchscreen panel




EGO-PA 039     aged platinum
EGO-FA 1153     bleached oak
EGO-LE 1109     bronze leather
EGO-VM 305     stripped copper
EGO-ME 1175    blue green stripped
EGO-FA 1094     rovere black